We will call you back soon!


Your message has been sent!


German English Espanol Italian China French Polish
Log in for dealers

Scan CONDTROL

Vendor code: 3-12-027

Warranty: 24 Month

User manual

CONDTROL SCAN Detector

CONDTROL SCAN is designed to detect metal, wooden elements and live wiring in walls, ceilings and floors. Before drilling, sawing or chasing, the device helps you find out what lies beneath the finish. This reduces the risk of damaging a cable, pipe or rebar.

The detector is suitable for electrical installation, renovation and interior finishing, as well as for a home workshop.

Operating Principle

CONDTROL SCAN detects objects using the sensor surface on the housing. The device is moved along the wall, and as it approaches an object, the proximity indicator on the display rises from 0 to 100%.

At the same time, the light indicator changes color from green to yellow and then to red, and a sound signal is given. When the object is exactly under the center of the sensor, the center symbol appears on the display. This allows you to mark the exact location of a beam, pipe or rebar on the wall.

Metal Detection with Depth Indication

In metal detection mode, CONDTROL SCAN finds ferrous metals at a depth of up to 100 mm and non-ferrous metals, such as copper, at a depth of up to 80 mm. Above the center of the object, the device shows its depth in centimeters. The most accurate depth value is obtained for rebar with a diameter of 18 mm positioned parallel to the detector.

Separate symbols on the display show what type of metal has been found: magnetic, such as steel, or non-magnetic, such as copper. This hint makes it easier to tell rebar from a copper pipe.

Live Wire Detection

CONDTROL SCAN detects cables carrying AC voltage at 40–60 Hz at a depth of up to 50 mm. The device shows de-energized wires as metal objects. Live wiring is detected in both metal and wood detection modes, so a dangerous cable will not go unnoticed. To determine the cable route accurately, move the device over the surface several times.

Metal surfaces and very damp walls can shield the signal. Such areas are revealed in metal detection mode by identical readings over a large area. If static electricity interferes with the work, simply place your free hand on the wall next to the device.

Wood Detection

Wood detection mode allows you to find hidden beams, joists and framework elements at a depth of up to 20 mm. The detector is calibrated on a flat section of the wall and is then ready for scanning.

CONDTROL SCAN is suitable for work with framed partitions, cladding and wooden floors. A located beam helps you choose a reliable place for fixings.

Display, Sound Indication and Digital Vial

The CONDTROL SCAN display shows the operating mode, battery level, proximity indicator, metal depth and type of metal detected. The sound signal is switched on and off with a separate button if you prefer to rely on the screen alone.

The built-in digital vial shows its readings directly on the display. With it, you do not need a separate tool to quickly check the position.

Power Supply and Battery Life

CONDTROL SCAN runs on one 9 V 6LR61 alkaline battery. It lasts for about 6 hours of continuous operation. To save the battery, the device switches off automatically 5 minutes after the last action.

Standard Package

Device — 1 pc.
Pouch — 1 pc.
Battery — 1 pc.
User Manual — 1 pc.


Specifications:

  • Maximum scanning depth:
  • Ferrous metals100mm;
  • Non-ferrous metals (copper)80mm;
  • Copper cable (live)50mm;
  • Wood20mm;
  • Battery 1x 9V 6LR61 (Alkaline-Battery)
  • Storage temperature –20 °C ... +70 °C
  • Operating temperature –10 °C ... +50 °C
  • Dimensions 196x76x25 mm
  • Weight 0,145 kg