CONDTROL Vector 150 Lite — laser distance meter
CONDTROL Vector 150 Lite
CONDTROL Vector 150 Lite is a professional laser distance meter for fast and accurate measurements at distances up to 150 m. The device is designed for measuring distances, calculating areas and volumes, performing indirect calculations using the Pythagorean theorem and calculations with the inclinometer.
The distance meter is suitable for use both indoors and on open construction sites. Vector 150 Lite is useful for builders, finishers, installers, window measurers, furniture installers, facade workers, roofers and other specialists who need an accurate tool for working over long distances.
Measurements up to 150 Meters
Vector 150 Lite measures in the range of 0.05–150 m with an accuracy of ±1.5 mm and a resolution of 1 mm. The device is suitable for measuring rooms, facades, building structures, long sections and distant objects.
In bright sunlight or when measuring to surfaces with low reflectivity, it is recommended to use a target plate.
Digital Viewfinder
For convenient targeting of distant objects, Vector 150 Lite is equipped with a digital viewfinder. It helps you precisely select the measuring point over long distances, when the laser dot is difficult to see with the naked eye.
The image can be enlarged and reduced using the ZOOM function. When measuring at distances of 20–150 m, the laser dot is calibrated and positioned in the center of the crosshair on the display, making it easier to aim precisely at the target.
Advanced Calculation Functions
CONDTROL Vector 150 Lite not only performs direct distance measurements, but also offers a wide range of calculations:
- Rectangle area
- Wall area
- Triangle area
- Circle area
- Trapezoid area
- Volume
- Cylinder volume
- Cone volume
- Addition and subtraction of measurements
- Addition and subtraction of areas and volumes
- Calculations using the Pythagorean theorem
- Calculations using the inclinometer
Inclinometer and Digital Level
The built-in inclinometer is used to calculate slope distances and perform indirect measurements. It helps determine the parameters of objects that cannot be approached directly, as well as perform calculations based on angles and inclined planes.
The digital level function lets you monitor the position of the device and use the distance meter as an electronic level during measurements and layout marking.
Continuous Measurement and Min/Max
The continuous measurement mode, or tracking, lets you monitor the distance in real time. The display shows the current value, the minimum value, the maximum value and the difference between the maximum and minimum values.
This function is convenient for finding the shortest distance to a surface, measuring diagonals, checking height differences and locating the required point on an object.
Four Reference Points
For convenient work in different conditions, you can select the reference point: front, rear, tripod and fold-out end piece. The fold-out end piece helps you take measurements from corners and hard-to-reach places. The tripod reference point is convenient for long series of measurements and for working over long distances.
Timer and Measurement Memory
The built-in timer allows you to take measurements with a delay. This reduces the risk of the device shifting when the button is pressed and improves accuracy when working from a tripod.
The built-in memory stores up to 30 values, so you can quickly return to previous results and use them in calculations.
IP65 Protection and Rechargeable Battery
The Vector 150 Lite housing has an IP65 dust and water protection rating, allowing the device to be used on construction sites, in dusty conditions and in high humidity.
The device is powered by a rechargeable lithium-ion battery 3.7 V, 1000 mAh. A USB-C charging cable is included.
Key Benefits
- Measuring range up to 150 m
- Accuracy ±1.5 mm
- Digital viewfinder
- ZOOM function for targeting distant objects
- Digital level
- Calculations using the inclinometer
- Calculations using the Pythagorean theorem
- Area of rectangle, walls, triangle, circle and trapezoid
- Volume, cylinder volume and cone volume
- Addition and subtraction of measurements, areas and volumes
- Continuous measurement with Min/Max
- Timer
- 4 reference points
- Memory for up to 30 values
- Display backlight
- IP65 protection
- Li-Ion battery with USB-C charging
Applications
- Measuring rooms, facades and long objects
- Measuring window and door openings
- Calculating the area of walls, floors, ceilings and facades
- Calculating room volume
- Calculating the parameters of cylindrical and conical objects
- Measuring hard-to-reach heights and distances using the Pythagorean theorem
- Checking inclined planes with the inclinometer
- Outdoor and construction site measurements
- Preparing cost estimates and calculating material quantities
Target Audience
- Construction companies
- Finishers
- Installers
- Tilers
- Facade workers
- Roofers
- Window and door measurers
- Furniture installers
- Building services specialists
- DIY enthusiasts
Scope of Delivery
- Laser distance meter — 1 pc.
- User manual — 1 pc.
- USB-C charging cable — 1 pc.
- Wrist strap — 1 pc.
- Pouch — 1 pc.